Podcast interface for more flexible content creation

The Vocaster Two is a podcast interface with two microphone inputs and two headphone outputs, for creators who create diverse content.
It also supports Bluetooth connection, allowing you to create deeper and more convenient content.

■Main Features
SET UP IN SECONDS: Auto gain automatically sets the mic level with the push of a button. Simply click the button and talk toward the microphone, and even if you’re not used to set the microphone level.
TRANSFER YOUR VOICE ACCURATELY – The enhanced button delivers a sound that brings out the true good voice of your voice. 3 kinds of voice splits are used to record any voice in the best condition.
Bluetooth Connection: Vocaster Two supports audio input with Bluetooth 5.0. Wirelessly input your smartphone or other voice to make your studio setup more convenient.
Simple operation: The Vocaster controls are only 3 operation buttons for monitor volume and microphone volume. Simple operation to set up the environment. Even if you want to record two conversations, each can use the microphone setup and headphones.
Record calls voice: You can connect it to your mobile device to send audio to your PC software. Accurately record important conversations and meetings
Sound that enhances the footage: Equipped with audio output for video devices. Add audio from Vocaster to your footage and take your content to a higher level.
Convenient to Carry: Vocaster is small and lightweight, and can be powered by USB bus so you can always have a conversation with high quality sound.
Mute Function: Mic mute button located in the most accessible position to keep out unwanted voice.
Pursuing content: Equipped with a loopback function that returns the sound of the PC to the desired software. Enables you to create more fun and sophisticated content.

■ Vocaster main unit functions
Headphone Volume (Guest)
Microphone Gain
Headphone Volume (Host) / Output Volume
Mic Mute
Enhanced function On/Off
Adjustment microphone channel selection/ auto gain (long press )
Mic input (Host)
Mic Input (Guest)
48v Phantom Power
Mobile Device Connection Connector (3.5mm TRRS jack)
Bluetooth link button
output (1/4″ TRS jack)
Audio Out for Video Devices
USB-C Connector (USB3.0)
Kensington Rock
Power Button

■ Vocaster hub (utility software)
The Vocaster hub is your only control room. Use the Vocaster mixer to make your content amazing.
You can set levels, adjust the sound, route audio from your mobile device or PC like a broadcast studio.

■Specification
Sample Rate: 48 kHz
Phone Input
Impedance: 16KΩ
THD+N (@ -1dBFS) ≦-94dB
Maximum Input Level: 0dBu
Frequency Response: 20Hz – 20KHz +0, -0.5
Headphone Output
Impedance: 5Ω
Maximum Output Level: @ 0dBFS +6.5dBu
USB
Vesion: USB 3.0
Maximum Current: 0.9A
Maximum Voltage: 5V
Maximum Power: 4.5W
Phone Output
Impedance: 220Ω
Maximum Output: Level -26dBu
THD+N: -73dB
Frequency Response: 20Hz – 20KHz +0dB, -0.5dB
Camera Output
Impedance: 220Ω
Maximum Output Level: -24.5dBu
THD+N (Max Output, -1dBFS, 22Hz – 22kHz): -73dB
Frequency Response: 20Hz – 20KHz ±0.2dB
Microphone Input
Impedance: 3KΩ
Maximum Input Level: +12.5dBu @ minimum gain
Gain Range: 70dB
THD+N (@ -1dBFS): ≦-94dB
Frequency Response (20Hz @ mininum gain): 20Hz – 20KHz +0, -0.5 dB
Line Outputs.
Impedance: 440Ω
Maximum Output: Level +14dBu
THD+N (@-1 dBFS): ≦-96dB
Frequency Response: 20Hz – 2kHz ±0.15dB
Bluetooth (VocasterTwo)
Version: 5.0
Range: 7 metres in open space
Analogue Outputs.
Main outputs : Balanced, 2 x 1/4″ TRS jacks
Stereo headphone output: 1/4″ TRS jack on front panel
Output level control
Other Audio I/O
Camera output 3.5 mm TRS
jack on rear panel
Phone input and output: 3.5 mm TRRS jack on rear panel
Loopback inputs: Two (stereo) via Vocaster Hub
Microphone Input
Connector: Balanced, via female XLR on rear panel
Phantom power: 48V, rear panel switch
Enhance Preset (Microphone Correction Preset)
Clean
Warm
Bright
Radio
Weight and Dimensions
Weight: 15.2 oz (440
Height: 2 inches (50 mm)
Width: 8.8 inches (224 mm)
Depth: 4.5 inches (113 mm)
Accessories:
USB Cable (A to C)
Input channel assignment in recording software (VocasterTwo)
1/2: Video Call L/R (All inputs MIX except loopback)
3/4: Show Mix L/R (All Input Mix)
5: Host Microphone
6: Guest Microphone
7/8: Aux L/R (voice connected to phone input)
9/10: BlueTooth
11/12: LoopBack1 L/R (Software Play 1/2)
13/14: LoopBack2 L/R (Software Playback 3/4)